• The volume of air in the room with the purpose should have at least 18 cm
• The outer surface of the glass should be calculated by multiplying a volume of 0.05 kV. m. premises with the purpose of central heating (less than 18 cm)
• Air for combustion of fuel, required insurance will be calculated by multiplying CMP 0.25 for each established cubic meter of gas (the balance sheet is taken from the technique boiler).
• Types of micro heat. Depending on the area of the house that you want to heat, the central heating can be divided into two categories:
• Walls, with a capacity of 14 to 28 kW and stationary (floor) for forces more than 28 kW, preferably for large houses. Discuss thermal equipment completely (with a closed capacity of expansion, pumps, equipment for hot water supply, automation, etc. D.).
Technologies of the microtepers
• delivered to the recipient on the principle of connection to heating. These designs built according to ISO 9000 // 2 excluded such accidents … The boiler is made of steel or copper. The preparation of hot water is carried out in two ways: using a heat exchanger or a storage tank.
All models are built in two versions: with a natural traction (currently a chimney) or forced traction, the so -called turbo (there is no need for a chimney).
• Turbo boilers, as a rule, about 20% more expensive than the classic version. These types of structures are equipped with a combustion control sensor, it automatically blocks the entire system if pathological discharge or gas return to a boiler room occurs to a boiler room. Most of these boilers have a sensor of detection of a lack of water, a concentrator where the spills occur and leads to a decrease in the pressure of the boiler room or stops automatically.
